Errori - Allarmi Elettrodomestici
Faq - Errori - Allarmi Elettrodomestici Lavatrici, Lavastoviglie, Frigoriferi, Asciugatrici e Forni
Ricerca Errori - Allarmi Elettrodomestici Lavatrici, Lavastoviglie, Frigoriferi, Asciugatrici e Forni
Contatti Errori - Allarmi Elettrodomestici
Forni Errori - Allarmi Multimarche
Ovens Errors Alarms - All Brands
Errors - Alarms Appliances
Faq - Errors - Alarms Home Appliances Washing machines, Dishwashers, Refrigerators, Ovens and Dryers
Ricerca Errori - Allarmi Elettrodomestici Lavatrici, Lavastoviglie, Frigoriferi, Asciugatrici e Forni
Contact - Errors Alarms Home Appliances


Assistenza Elettrodomestici Milano
Assistenza Elettrodomestici Monza
Assistenza Elettrodomestici Bergamo
Assistenza Elettrodomestici Brescia
Assistenza Elettrodomestici Multimarche
Assistenza Elettrodomestici Varese

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Errori - Allarmi Elettrodomestici - Lavatrici, Lavastoviglie, Frigoriferi, Asciugatrici e Forni

We use cookies to improve your browsing. By visiting the site you agree to our use of cookies. More information about cookies

Ovens Errors Alarms

The most common errors:


  

Ovens Aeg - F1: the door does not lock

Other: F0, F2, F3, F4, F5, F7, F8, F9


Ovens Ariston - F8E0: reg temperature potentiometer

Other: F1E2, F3E0, F3E3, F4E0, F5E2, FFFF


Ovens Bosch - F32: Temperature Sensor

Other: F41, F42, F43, F44, F45


Ovens Candy - ER01: communication between modules

Other: ER02, ER03, ER04, ER05, ER06, Er07, Er08, Er09, ER10, ER11, Er12, Er13, Er14, ER15, ER16, ER17, ER18, ER19, ER20


Ovens Electrolux - F3: Self Test error

Other: F0, F1, F2, F4, F5, F7, F8


Ovens Indesit - F3: NTC fault

Other: F1, F2, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18

Choose Brand :

AEG
  • Ovens Errors

ARISTON

BOSCH

CANDY

Electrolux

INDESIT

F0


No alarm signal

Replace the main electronic controller



F1


The door does not lock

Check lock



F2


The door will not unlock

Check the locking mechanism of the door

Check thermostat



F3


Error Autotest

Disconnect the oven from the power supply

Wait five minutes without network connected

Reconnect the oven and restart



F4


Circuit shorted or open the oven temperature sensor

Check the sensor harness and exploit the connection between the microwave sensor and the oven control

Replace the sensor of temperature of the oven if the wiring is ok



F5


Contacts relays detected as attack

Replace the electronic board



F7


Incorrect power supply polarity

Check the network connection is correct



F8


Power supply problem of interfacing

Check wiring and connectors

Replace the main control board electronic



F9


Processor is auto reset

Disconnect the oven from the power supply

Wait five minutes without network connected

Reconnect the oven and restart

F1E2


Electronic card damaged


F3E0


Temperature sensor in short circuit.



F3E3


Temperature sensor disconnected or

open circuit.


F4E0


Electronic card damaged



F5E2


The oven temperature is center

too high (> 325 ° C).



F8E0


Problem potentiometer temperature controller.



FFFF


Unknown error.

F32


Lower the oven temperature sensor failure; an open or short circuit in the sensor wiring of the oven lower

Check all connections, especially P24 on the power board.

Disconnect the connector senor and check the sensor resistance (about 1080 ohms at room temperature with connector removed). Remember to reconnect.

Check that neither the sensor cable is open or pinched to the frame of the device.

Make sure the solder joint in the header P24 on the power board are not broken.

If the sensor is OK, replace the power board.



F41


Higher (or single) oven still not motorized locks; defective or jammed top (or only) oven door latch or switches; faulty engine stopped or its wiring.

Check connector P24 on the power board.

Ensure door latch switches are working properly.

Check that neither the lock switch or crush wires common to the frame of the device.

Check that solder joints header P24 on the power board are not broken.

Check the P10 connector and check if the engine is pinched wire retainer to the chassis of the device.



F42


Latch motorized bottom it locks; defective or jammed lower oven door or stop switches; faulty engine stopped or its wiring.

Check connector P24 on the power board.

Ensure door latch switches are working properly.

Check that neither the lock switch or crush wires common to the frame of the device.

Check the P10 connector and check if the engine is pinched wire retainer to the chassis of the device.

If F42 persists, replace the power board.



F43


Higher (or single) oven still not motorized locks; defective or jammed top (or only) oven door latch or switches; faulty engine stopped or its wiring.

Check connector P24 on the power board.

Ensure door latch switches are working properly.

Check that neither the lock switch or crush wires common to the frame of the device.

Check the P10 connector and check if the engine is pinched wire retainer to the chassis of the device.

If F43 persists, replace the power board.



F44


Latch motorized bottom it locks; defective or jammed lower oven door or stop switches; faulty engine stopped or its wiring.

Check connector P24 on the power board.

Ensure door latch switches are working properly.

Check that neither the lock switch or crush wires common to the frame of the device.

Check the P10 connector and check if the engine is pinched wire retainer to the chassis of the device.



F45


Higher (or single) oven still not motorized locks; defective or jammed top (or only) oven door latch or switches; faulty engine stopped or its wiring.

Check connector P24 on the power board.

Ensure door latch switches are working properly.

Check that neither the lock switch or crush wires common to the frame of the device.

If F45 persists, replace the power board.

ER01


Communications between the defective electronic control modules



ER02


Faulty program selector



ER03


Faulty program selector



ER04


NTC sensor on the Main Control Board records open circuit



Er05


NTC sensor on the main control board registers as a short circuit



ER06


Main motherboard temperature exceeds 85 ° C



Er07


NTC temperature probe detected as an open circuit



Er08


NTC temperature probe detected as short circuit



Er09


NTC temperature probe detected as exceeded 85 ° C



ER10


Oven temperature probe NTC detected as an open circuit



ER11


Probe oven temperature NTC detected as short circuit



Er12


Case temperature of the oven has exceeded 300C



Er13


The set temperature is not reached in 105 minutes



Er14


Oven timer mechanical recitation open circuit



Er15


Door sensor reads open circuit



ER16


Probe display board temperature detected NTC open circuit



ER17


Probe display board temperature NTC detected as short circuit



ER18


Display the temperature on board exceeds 75 ° C



Er19


Malfunction of EEPROM on the Main Control Board



ER20


Software error of recipe

F0


No alarm signal


F1


The door does not lock


F2


The door will not unlock



F3


Error Autotest



F4


Circuit shorted or open the oven temperature sensor



F5


Contacts relays detected as attack



F7


Incorrect power supply polarity



F8


Power supply problem of interfacing



F9


Processor is auto reset

F1


Motor short circuit on the triac electronic form



F2


Motor detected as being jammed



F3


Failure NTC - temperature sensor is detected as an open circuit or shorted



F4


Pressure switch jammed on empty



F5


Pressure switch jammed on full



F6


not used



F7


Heater relay stuck



F8


Relay heater can not be activated



F9


Installation error or EEPROM incompatible



F10


Pressure switch or level sensor not being properly detected



F11


Drain pump can not be activated



F12


No communication between the electronic control boards



F13


not used



F14


not used


F15


not used


F16


not used


F17


Door lock error



F18


Communication error electronic control module

All Brands

Whirlpool washing machine does not turn on ?

If the washing machine on and off during washing or simply would not light up, only these components are likely to be replaced !

Rex Dryer does not turn on ?

The Rex dryer would not light up?

You can repair the card!

Do not need to replace it!

Copyright © 2012-2014 Errori-elettrodomestici.it . All rights reserved. By Stefano

Do you need assistance ?

Milano Monza Bergamo Brescia Cremona Varese